[cisco-voip] BAT and Call Pickup Groups

[Voll, Scott]

Is the pickup group number already configured?

Scott

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Pritchard, Jon
Sent: Saturday, February 03, 2007 3:04 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] BAT and Call Pickup Groups

Anyone had any luck inserting call pickup groups using BAT?  

I'm using BAT 5.2(3) on CCM 4.2(3)sr1.  No matter what variation of the
csv file I use, including the one produced by BAT.xlt I get an error
popup "Wrong number of arguments or invalid property assignment".  If I
deliberately use a invalid format csv file the parser comes back with an
error you'd expect about invalid fields/format.  So I have to assume the
csv file doesn't appear to be the problem.

Jon Pritchard - Sr. Network Engineer
ADP Network Solutions Group

 


This message and any attachments are intended only for the use of the
addressee and may contain information that is privileged and
confidential. If the reader of the message is not the intended recipient
or an authorized representative of the intended recipient, you are
hereby notified that any dissemination of this communication is strictly
prohibited. If you have received this communication in error, please
notify us immediately by e-mail and delete the message and any
attachments from your system.

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip