[cisco-voip] show voice call status

[Erick Bergquist]

I can't find the cisco doc at the moment, but AFIAK the * means it's the destination leg of call.

----- Original Message ----
From: kevin k <kds850 at gmail.com>
To: cisco-voip at puck.nether.net
Sent: Tuesday, February 6, 2007 3:13:57 PM
Subject: [cisco-voip] show voice call status

can anyone explain this

look at "callID" 0x890F.  why does it have "*"  i have not seen that.

what is it?  thanks much

 

 

gateway#sh voice call status
CallID     CID  ccVdb      Port        DSP/Ch  Called #   Codec    Dial-peers
0x8909     1610 0x4657950C 0/2/0:23.3  0/1:3              g711ulaw 1/0
0x890F     1613 0x4657950C 0/2/0:
23.7  0/5:3  *           g711ulaw 0/1
0x8913     1615 0x4657950C 0/2/0:23.1  0/1:1              g711ulaw 1/0
0x891B     1619 0x4657950C 0/2/0:23.2  0/1:2              g711ulaw 1/0

 

 

 

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip







 
____________________________________________________________________________________
Any questions? Get answers on any topic at www.Answers.yahoo.com.  Try it now.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070206/9c4768c5/attachment.html