[cisco-voip] Unity 4.X and CallManager 5.0 SIP Trunk DTMF

[Jason Aarons (US)]

For Unity 4.x with UnityTSP 8.1(3) does Unity care whether my
CallManager 5.0 SIP Trunk to telco is using dtmf-relay vs sip-kpml vs
sip-notify?

 

For example with H323 Gateway I need to use dtmf-relay h245-alphanumeric
with Unity for DTMF. There are issues with h245-signal.

 

 

 

 

 

Jason Aarons

Consultant

http://www.dimensiondata.com/na <http://www.dimensiondata.com/na> 

904-338-3245 cell

 

For urgent issues notify your Project Manager, for 24x7 support contact
the Dimension Data NOC at 800-974-6584.

 



-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070208/8f22c009/attachment-0001.html