[cisco-voip] DST patch

[Chris D'amore]

I have just applied the Daylight Savings Time (DST) patch to a
CallManager in our test lab. The CCM is running 4.1(3)sr3c. The server
OS is running 2000.4.3aSR8. After applying the CCM DST patch, I set the
date to March 11th and the time to 1:55AM. The system time goes from
1:59AM to 3:00AM, just like it is supposed to. The time changes on the
phones after a minute also.
The issue is, we are doing time of day routing on the CallManager using
Time Periods and Time Schedules. When I simulate the time change (as
noted above), our time of day routing is off by an hour. This is the
case when I have "Specific Time Zone" checked and the appropriate time
zone defined in the Partition Configuration page. If I change this to
"Originating Device", our time of day routing works just fine.
 
I was wondering if anyone else has seen this behavior after applying
this patch.
Thanks,
Chris

 

 

 

NOTICE: This electronic mail message and any files transmitted with it are intended exclusively
for the individual or entity to which it is addressed. The message, together with any attachment, may contain confidential and/or privileged
information. Any unauthorized review, use, printing, saving, copying, disclosure 
or distribution is strictly prohibited. If you have received this message in error, please immediately
advise the sender by reply email and delete all copies.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070208/6a5aee64/attachment.html