[cisco-voip] Change Calling Party Number in CME/CUE

[Jeff Anderson]

The configuration:

PSTN > PRI > CME > VOIP peer to CUE Script > Call redirect from CUE to ip phone.

The user answering the ip phone is taking calls for three different locations. The CUE script is trigged with three different VOIP peers. The numbers are 200, 300, and 400. All go to the same script which has switch statements based on called number that manipulate the call within the script.

The user answering the ip phone sees the original calling party number when their phone rings. I would like the user to see what store was called or at least see a different number for each store. I don't want to change the destination of each call if at all possible. The phone system is configured similar to a key system so it wouldn't be an easy adjustment for the users answering the phone.

I have tried setting "clid network-number xxxxxxxxx" under the voip peer with no success. I also tried setting the calling party number to be something different using a SET statement in the script; again with no success.

Does anyone have any ideas on how I can accomplish this? 

Thanks,

Jeff