[cisco-voip] Dual PRI Config

[CarlosOrtiz at bayviewfinancial.com]

I usually use MGCP but I am not working at a place that is using H.323 on 
their gateways (been a while for H.323) .  They are adding a second PRI to 
an office and want to set this up to increase capacity/redundancy.  Is it 
still typical to use the dial-peer preference command to select the 
preferred outbound PRI.  Is their another way such as trunk group or 
soemthing like that?

Carlos
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070209/439c653c/attachment.html