[cisco-voip] DST patch

[Jonathan Charles]

You need to load the CallManager specific patch for your system, not just
the OS patch.



Jonathan

On 2/8/07, Chris D'amore <CDAmore at jackhenry.com> wrote:
>
>  I have just applied the Daylight Savings Time (DST) patch to a CallManager in our test lab. The CCM is running 4.1(3)sr3c. The server OS is running 2000.4.3aSR8. After applying the CCM DST patch, I set the date to March 11th and the time to 1:55AM. The system time goes from 1:59AM to 3:00AM, just like it is supposed to. The time changes on the phones after a minute also.
>
> The issue is, we are doing time of day routing on the CallManager using Time Periods and Time Schedules. When I simulate the time change (as noted above), our time of day routing is off by an hour. This is the case when I have "Specific Time Zone" checked and the appropriate time zone defined in the Partition Configuration page. If I change this to "Originating Device", our time of day routing works just fine.
>
>
>
> I was wondering if anyone else has seen this behavior after applying this patch.
>
> Thanks,
>
> Chris
>
>
>
>
>
>
>
> NOTICE: This electronic mail message and any files transmitted with it are intended exclusively
> for the individual or entity to which it is addressed. The message, together with any attachment, may contain confidential and/or privileged
> information. Any unauthorized review, use, printing, saving, copying, disclosure
> or distribution is strictly prohibited. If you have received this message in error, please immediately
> advise the sender by reply email and delete all copies.
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070212/20da33f3/attachment.html