[cisco-voip] IPCCX 4.0 Script conversion

[Jonathan Charles]

The problem comes (AFAIK) with the fact that these variables did not exist
previously and the conversion creates these temp variables to fill the gap.

I would leave them alone (and I have), as long as the script works and your
CSQs get calls, it isn't a problem.

If you change them, you might break the script.



Jonathan

On 2/13/07, Rasim Duric <rduric at uoguelph.ca> wrote:
>
> I'm migrating the IPCCX 3.5(3) scripts to 4.0(5) and getting some new
> variables and new steps during this process.
>
> These new variables start with the underscore such as:
> _Contact1171314660846, _ECCVarName1171314660893, TmpRsrc1171314660903...
>
> And for example, the 3.5 step "Set Session Info" is replaced with:
> "Set =_Contact1171314660846 *********
> If _Contact1171314660846!= null) then
> true
> set Enterprise Call Info (_contact1171314660846)
> false"
>
> Would it be OK if I just leave these variables and steps as is in the
> 4.0(5) HA environment? If not, how would I fix this up? Thanks.
>
>
> Rasim Duric
> Network Analyst (CCS)
> University of Guelph
> Guelph, N1G 2W1, ON
> 519-824-4120x53146
> rduric at uoguelph.ca
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070213/80c0557f/attachment.html