[cisco-voip] PRI-GROUP

[David Sullivan]

cisco-voip-bounces at puck.nether.net wrote:
> 
> 
> I am running an 2610 with "C2600-is5-mz.122-15.T17.bin" but i
> am unable to configure a E1 PRI as i am not getting pri-group
> command. Please let me know if i need to upgrade it to IP-Plus image.
> 
> 
is5 indicates that this is an IP Plus image but excluding HD Analog &
AIM ATM/Voice to fit in the 16M 2600 flash limits. If you're licensed
for IP Plus you should be running an equivalent is4 image which excludes
support for the switch NM modules instead.

Regards.

David Sullivan
IT Services
Barnet College
-----------------------------------------------------------------------------
This communication may contain privileged or confidential information which
is for the exclusive use of the intended recipient.  If you are not the
intended recipient, please note that you may not distribute or use this
communication or the information it contains.  If this e-mail has reached you
in error, please delete it and any attachment.

Internet communications are not secure and Barnet College does not accept
legal responsibility for the content of this message.  Any views or opinions
expressed are those of the author and not necessarily those of Barnet College.

Please note that Barnet college reserves the right to monitor the
source/destinations of all incoming or outgoing e-mail communications.
-----------------------------------------------------------------------------