[cisco-voip] does a invalid NANPA number use up a trunk?

[Lelio Fulgenzi]

Never mind, I did a show voice port and it showed the voice ports dormant.


--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
...there's no such thing as a bad timbit...

  ----- Original Message ----- 
  From: Lelio Fulgenzi 
  To: cisco-voip at puck.nether.net 
  Sent: Friday, February 16, 2007 10:16 AM
  Subject: [cisco-voip] does a invalid NANPA number use up a trunk?


  I've got a PRI used during SRST. I translate a number to a invalid NANPA number before sending to the voiceport, e.g. 16840000000.

  Question: During the call setup, is an actual channel used when I am hearing reorder? Or is it the D channel that is providing that information?

  --------------------------------------------------------------------------------
  Lelio Fulgenzi, B.A.
  Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
  (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
  ...there's no such thing as a bad timbit...



------------------------------------------------------------------------------


  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070216/1dca82e2/attachment.html