[cisco-voip] MGCP PRI redundancy

[cisco.voip]

Where do I check the endpoint registration?  It still show up with the sh
mgcp end command.

I am on CCM 4.2.3sr1 and the IOS is 12.4(11)T




----- Original Message ----- 
From: "Erick Bergquist" <erickbe at yahoo.com>
To: "droeseler" <cisco.voip at verizon.net>; <cisco-voip at puck.nether.net>
Sent: Thursday, February 15, 2007 11:29 PM
Subject: Re: [cisco-voip] MGCP PRI redundancy


When you shutdown the interface , did the endpoint unregister and show
unregistered?

Which version of 4.2, and IOS version?

Do calls work inbound on second PRI if it has inbound numbers coming to it?
What happens if you flip the order of the endpoints in the route group?

Did you make any changes to 2nd endpoint and maybe not reset it for changes
to be effective?

----- Original Message ----
From: droeseler <cisco.voip at verizon.net>
To: cisco-voip at puck.nether.net
Sent: Thursday, February 15, 2007 11:49:30 AM
Subject: [cisco-voip] MGCP PRI redundancy

All, I have CCM 4.2, and 3800 MGCP gateway router connected with two PRI to
the local provider.

My questions are how does th CCM handle the failover?
I have admin shut the first controller and the calls now fail even thought
the second pri is up?

Is there anything else I need to do in the CCM?  I have route list and the
two GW configured in the route group?

Thanks,






____________________________________________________________________________
________
Now that's room service!  Choose from over 150,000 hotels
in 45,000 destinations on Yahoo! Travel to find your fit.
http://farechase.yahoo.com/promo-generic-14795097