[cisco-voip] MGCP PRI redundancy

[Erick Bergquist]

Unknown on a MGCP endpoint means that endpoint has not been registered to call manager since the call manager service was last restarted, server reboot, etc. It will say not registered if the endpoint was registered at one point then became unregistered from call manager since call manager service was last started.

Can you post a 'show controller t1' and 'show isdn status' from the actual router/gateway? 

Also post a config of the controller T1 interface and the D channel interface.

Erick

----- Original Message ----
From: cisco.voip <cisco.voip at verizon.net>
To: Jonathan Charles <jonvoip at gmail.com>
Cc: Erick Bergquist <erickbe at yahoo.com>; cisco-voip at puck.nether.net
Sent: Friday, February 16, 2007 11:31:36 AM
Subject: Re: [cisco-voip] MGCP PRI redundancy



 
 


THe Endpoint for #1 says registration: 
Unknown

 


  ----- Original Message ----- 

  From: 
  Jonathan 
  Charles 

  To: cisco.voip 

  Cc: Erick Bergquist ; cisco-voip at puck.nether.net 

  Sent: Friday, February 16, 2007 12:24 
  PM

  Subject: Re: [cisco-voip] MGCP PRI 
  redundancy

  

Go to to CCM - Device Gateways - Find... use the dropdown to 
  show endpoints...

Anything say 'not 
  registered'?



Jonathan


  On 2/16/07, cisco.voip <cisco.voip at verizon.net> 
  wrote:
  Where 
    do I check the endpoint registration?  It still show up with the 
    sh
mgcp end command.

I am on CCM 4.2.3sr1 and the IOS is 
    12.4(11)T




----- Original Message -----
From: "Erick 
    Bergquist" < erickbe at yahoo.com>
To: "droeseler" 
    <cisco.voip at verizon.net>; 
    <cisco-voip at puck.nether.net 
    >
Sent: Thursday, February 15, 2007 11:29 PM
Subject: Re: 
    [cisco-voip] MGCP PRI redundancy


When you shutdown the interface 
    , did the endpoint unregister and show
unregistered?

Which version 
    of 4.2, and IOS version?

Do calls work inbound on second PRI if it 
    has inbound numbers coming to it?
What happens if you flip the order of 
    the endpoints in the route group?

Did you make any changes to 2nd 
    endpoint and maybe not reset it for changes 
to be 
    effective?

----- Original Message ----
From: droeseler <cisco.voip at verizon.net>
To: 
    cisco-voip at puck.nether.net 
    
Sent: Thursday, February 15, 2007 11:49:30 AM
Subject: 
    [cisco-voip] MGCP PRI redundancy

All, I have CCM 4.2, and 3800 MGCP 
    gateway router connected with two PRI to
the local provider.

My 
    questions are how does th CCM handle the failover? 
I have admin shut the 
    first controller and the calls now fail even thought
the second pri is 
    up?

Is there anything else I need to do in the CCM?  I have 
    route list and the
two GW configured in the route group? 
    

Thanks,






____________________________________________________________________________
________
Now 
    that's room service!  Choose from over 150,000 hotels
in 45,000 
    destinations on Yahoo! Travel to find your fit. 
http://farechase.yahoo.com/promo-generic-14795097


_______________________________________________
cisco-voip 
    mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip








 
____________________________________________________________________________________
Now that's room service!  Choose from over 150,000 hotels
in 45,000 destinations on Yahoo! Travel to find your fit.
http://farechase.yahoo.com/promo-generic-14795097
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070216/67fbac9d/attachment.html