[cisco-voip] MGCP PRI redundancy

[Jonathan Charles]

Are you sure that is the MGCP gateway... can you send a screenshot of the
show gateways?

The reason I am asking, is because, if you are looking at it wrong, you
could be seeing a normal H.323 gateway...



Jonathan

On 2/16/07, cisco.voip <cisco.voip at verizon.net> wrote:
>
>  THe Endpoint for #1 says registration: Unknown
>
>
> ----- Original Message -----
> *From:* Jonathan Charles <jonvoip at gmail.com>
> *To:* cisco.voip <cisco.voip at verizon.net>
> *Cc:* Erick Bergquist <erickbe at yahoo.com> ; cisco-voip at puck.nether.net
> *Sent:* Friday, February 16, 2007 12:24 PM
> *Subject:* Re: [cisco-voip] MGCP PRI redundancy
>
> Go to to CCM - Device Gateways - Find... use the dropdown to show
> endpoints...
>
> Anything say 'not registered'?
>
>
>
> Jonathan
>
> On 2/16/07, cisco.voip <cisco.voip at verizon.net> wrote:
> >
> > Where do I check the endpoint registration?  It still show up with the
> > sh
> > mgcp end command.
> >
> > I am on CCM 4.2.3sr1 and the IOS is 12.4(11)T
> >
> >
> >
> >
> > ----- Original Message -----
> > From: "Erick Bergquist" < erickbe at yahoo.com>
> > To: "droeseler" <cisco.voip at verizon.net>; <cisco-voip at puck.nether.net
> > <cisco-voip at puck.nether.net+>>
> > Sent: Thursday, February 15, 2007 11:29 PM
> > Subject: Re: [cisco-voip] MGCP PRI redundancy
> >
> >
> > When you shutdown the interface , did the endpoint unregister and show
> > unregistered?
> >
> > Which version of 4.2, and IOS version?
> >
> > Do calls work inbound on second PRI if it has inbound numbers coming to
> > it?
> > What happens if you flip the order of the endpoints in the route group?
> >
> > Did you make any changes to 2nd endpoint and maybe not reset it for
> > changes
> > to be effective?
> >
> > ----- Original Message ----
> > From: droeseler <cisco.voip at verizon.net>
> > To: cisco-voip at puck.nether.net
> > Sent: Thursday, February 15, 2007 11:49:30 AM
> > Subject: [cisco-voip] MGCP PRI redundancy
> >
> > All, I have CCM 4.2, and 3800 MGCP gateway router connected with two PRI
> > to
> > the local provider.
> >
> > My questions are how does th CCM handle the failover?
> > I have admin shut the first controller and the calls now fail even
> > thought
> > the second pri is up?
> >
> > Is there anything else I need to do in the CCM?  I have route list and
> > the
> > two GW configured in the route group?
> >
> > Thanks,
> >
> >
> >
> >
> >
> >
> >
> > ____________________________________________________________________________
> > ________
> > Now that's room service!  Choose from over 150,000 hotels
> > in 45,000 destinations on Yahoo! Travel to find your fit.
> > http://farechase.yahoo.com/promo-generic-14795097
> >
> >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070217/d644dd7a/attachment-0001.html