[cisco-voip] Fax servers

[Voll, Scott]

Can I set it up like PSTN - PRI - VGW (MGCP) - CM - H323 VGW - Xmedius ?
or does the PSTN VGW have to be H323?  I have no problem with H323 and
would move that way but I still have a legacy PBX behind CM and I just
have a route pattern xxxx to the PBX so if nothing matches on the CM it
goes to the PBX.  I'm hoping to get rid of the PBX soon but with 500+
DID's and none in consecutive order H323 would be a night mare as I move
DID's over.

 

Scott

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jason Aarons
(US)
Sent: Monday, February 19, 2007 2:07 PM
To: CarlosOrtiz at bayviewfinancial.com; Voll, Scott
Cc: cisco-voip-bounces at puck.nether.net; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Fax servers

 

I think you'll find a lot of issues with MGCP, for example CVP, VXML,
Mobility Manager all require H323. While MGCP is simple to configure,
the features seem to be developed around H323. 

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of
CarlosOrtiz at bayviewfinancial.com
Sent: Monday, February 19, 2007 1:56 PM
To: Voll, Scott
Cc: cisco-voip-bounces at puck.nether.net; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Fax servers

 


I did a trial run with Xmedius about 1 year ago. I believe you can use
it for inbound and outbound as you described.  The real plus with
Xmedius is that it is a software only solution that uses your H.323
gateways for faxing.  I'm not sure if anything has changed but at the
time they did not support MGCP.  Unfortunately all our gateways were
MGCP at the time.   Looked liked a good product with very fair pricing.
I think they price per B-channel used on a PRI. 

Carlos 

"Voll, Scott" <Scott.Voll at wesd.org> 
Sent by: cisco-voip-bounces at puck.nether.net 

02/19/2007 01:37 PM 

To

"Robert Kulagowski" <bob at smalltime.com> 

cc

cisco-voip at puck.nether.net 

Subject

Re: [cisco-voip] Fax servers

 

 

 




I was just looking at this.... and it's for VM only installs.  Which
doesn't make a lot of sense. But that's what it said.

Scott

-----Original Message-----
From: Robert Kulagowski [mailto:bob at smalltime.com] 
Sent: Monday, February 19, 2007 10:21 AM
To: Voll, Scott
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Fax servers

> We want to be able to fax from the PC's and receive faxes in our
email.
> What would be the best option?

How about this? 
http://www.ciscounitytools.com/App_IPFaxConfigurationWizard.htm

It may not be robust enough for what you want to do, and there's lots of

caveats, but I think I remember Jeff Lindborg (aka, "Mr. Unity") saying 
in the Cisco forums that a lot of those were CYAs.

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

________________________________

Disclaimer: This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the designated
addressee(s) named above only. If you are not the intended addressee,
you are hereby notified that you have received this communication in
error and that any use or reproduction of this email or its contents is
strictly prohibited and may be unlawful. If you have received this
communication in error, please notify us immediately by replying to this
message and deleting it from your computer. Thank you. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070219/98b6b604/attachment.html