[cisco-voip] toll bypass route lists - 9.@ with route filter or multiple regexp

[Kris Seraphine]

I don't know of any way to simplify to do toll bypass/teho in CCM.  It
becomes unmanageable very quickly with more than a few locations; especially
if you need to provide for re-routing out of the local gateway.

On 2/19/07, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:
>
>  Just wondering what others have done for toll bypass route lists. I have
> to create a route list which drops the 91 from calls from a remote site that
> are local to our gateways, but there are a significant number of exchanges,
> most of which are not in any particular range (while some are). I'd rather
> not mix and match, i.e. some route patterns with regexp and others with
> 9.@ and a route filter.
>
> What are others doing?
>
> --------------------------------------------------------------------------------
> Lelio Fulgenzi, B.A.     Network Analyst (CCS)
> University of Guelph     Guelph, Ontario     N1G 2W1
> (519) 824-4120 x56354     (519) 767-1060 FAX
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> Sanity First : Number of days with less than
> 50 messages in my inbox at the end of the day:    buffer overrun
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>


-- 
kris seraphine
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070220/386508e1/attachment.html