[cisco-voip] Unity failover....which TSP works?

[c3voip at nc.rr.com]

What I have seen is that if traffic is light, the inifinite loops 
usually get a chance to timeout and reset the Unity port which puts a 
message in the Application Log, but at high traffic times CallManager 
will send a call to a port that is looping/waiting for disconnect and 
will cause a ring no answer condition, which sends the call to the 
secondary server, and causes failover.

-C


>I may be in the same boat as you.  I have a CCM 4.13sr3a cluster with 
Unity 4.05.  I >was getting failovers for no apparent reason every few 
months and upgraded to the >latest TSP hoping that would solve the 
problem but just had another failover last >week.  
>
>You seem to have trouble-shot this further than I have if you've 
isolated the cause >to call disconnects from CCM.  Do you see the 
infinite loops coinciding with the >failover events?  I have not seen 
that. 
>
>
>
>On 2/20/07, c3voip at nc.rr.com <c3voip at nc.rr.com> wrote:
>I am running CCM 4.1(3)sr4a with Unity 4.0(5)es79 with redundant
>servers and TSP 8.1(3)es1.  I have been through multiple iterations of
>the TSP and Unity is still missing some call disconnects from CCM
>which is causing inifinite loops and failover. 
>
>Has anyone else had these problems and is there a workaround or
>resolution?
>
>Thanks,
>-C
>_______________________________________________
>cisco-voip mailing list
>cisco-voip at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
>
>-- 
>kris seraphine