[cisco-voip] Anyone using the dual NIC function of the 7825 Unified CallManager Appliance?

[Jonathan Charles]

It depends on which 7825...

I successfully did it with NFT on an HP DL320 (7825-H1)... You set up the
int as NFT and it creates a new interface that you assign an IP to... Make
sure both cables are plugged into the same switch.



Jonathan

On 2/20/07, Dockendorf, Dave <Dave.Dockendorf at ecolab.com> wrote:
>
>  I am looking at setting this up and just wondering if you need to
> configure an IP address on both cards or how that works.  I want to figure
> out how this works before I install licenses on the box.  I just don't know
> if you use two NIC's if the MAC changes?
>
> Let me know if you have any insight.
>
>
>
>
>
>
>
>
> *Dockendorf, Dave*
> *Senior Network Engineer*
>
> *Ecolab Inc.*
> 655 Lone Oak Drive
> Building E, 3rd Floor
> Eagan, MN 55121<http://maps.yahoo.com/py/maps.py?Pyt=Tmap&addr=655+Lone+Oak+Drive&csz=Eagan%2C+MN+55121&country=us>
>
> Dave.Dockendorf at ecolab.com
>
> tel:
> mobile:
>
> 651-795-5105
> 651-248-7040
>
>
>
>
>
>
>
>
>
>
> CONFIDENTIALITY NOTICE:
> This e-mail communication and any attachments may contain proprietary and privileged information for the use of the designated recipients named above.
> Any unauthorized review, use, disclosure or distribution is prohibited.
> If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message.
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070220/ee06aaf9/attachment.html