[cisco-voip] "SNMP data collector"

[Matthew Saskin]

I haven't dug around the MIB too much, but it appears that certain data 
points that are available via perfmon or RTMT aren't made available via 
SNMP OID's.
Is this correct, or am I just not looking hard enough...

-matt

Ryan Ratliff wrote:
> If you want to use SNMP to poll CM just use the Windows SNMP service.
>
> -Ryan
>
> On Feb 20, 2007, at 5:04 PM, Simon, Bill wrote:
>
> I read an older document that refers to "SNMP Data Collector" service
> for CallManager, which apparently provides a useful set of MIBS and a
> service that allows SNMP to poll the CallManager database.
>
> No trace of this anywhere in my CM 4.1.3 install...
>
> Was it removed in a prior version of CallManager?
>
> BillS.
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>