[cisco-voip] "SNMP data collector"

[Simon, Bill]

I agree, this is what I am seeing too.  That's why I thought the "SNMP 
data collector" service mentioned somewhere might expose this data to 
SNMP.  Otherwise, SNMP is not very useful for gathering CM stats, just 
server info.

Matthew Saskin wrote:
> I haven't dug around the MIB too much, but it appears that certain data 
> points that are available via perfmon or RTMT aren't made available via 
> SNMP OID's.
> Is this correct, or am I just not looking hard enough...
> 
> -matt
> 
> Ryan Ratliff wrote:
>> If you want to use SNMP to poll CM just use the Windows SNMP service.
>>
>> -Ryan
>>
>> On Feb 20, 2007, at 5:04 PM, Simon, Bill wrote:
>>
>> I read an older document that refers to "SNMP Data Collector" service
>> for CallManager, which apparently provides a useful set of MIBS and a
>> service that allows SNMP to poll the CallManager database.
>>
>> No trace of this anywhere in my CM 4.1.3 install...
>>
>> Was it removed in a prior version of CallManager?
>>
>> BillS.
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>   
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip

-- 
Bill Simon - bills at tns.its.psu.edu - (814) 865-2270
http://tns.its.psu.edu/