[cisco-voip] DST fixes/patches on CCM and Unity Servers?? Also CME and CUE ??

[tomlemay at adelphia.net]

I just installed the Cisco TAC DST patches on both CCM and Unity servers.  In the CCM case, it depends on what level of Operating system service release yo uare running, what level of call manager application software service release you are running, what level of call manager device pack you are running (for the phone level codes), if you have deployed any 7970\7971 color display phones which will need an individual code patch and then finally the cisco DST patch iteself for call manager.  The order is very sepcific in terms of what to instal lfirst and there are several reboots after each install step.

For unity, it again depends on the level of unity software application you are running.  In general, there is an all encompassing windows operating system code patch which must be installed on all unity servers.  Then, depending on the level of unity application code, specific steps on which additional patch to install.  Then, there is the JRE patch to apply.

Tom
---- "Miller wrote: 
> It is my understanding that patches need to be applied for Unity and
> Call Manager and that at least one reboot is necessary.  What versions
> of Unity and Call Manager are you running?
>  
> 
> Steve Miller
> Telecom Engineer
> Dickstein Shapiro LLP
> 1825 Eye Street NW | Washington, DC 20006
> Tel (202) 420-3370 Fax (202)-330-5607
> millers at dicksteinshapiro.com <mailto:millers at dicksteinshapiro.com>  
> 
>  
> 
> ________________________________
> 
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Brian E. Wyland
> Sent: Wednesday, February 21, 2007 12:25 PM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] DST fixes/patches on CCM and Unity Servers?? Also
> CME and CUE ??
> 
> 
> 
> Hello everyone,
> 
>  
> 
> I am just getting started looking into the Cisco fixes for DST on Call
> Manager and Unity Servers.
> 
>  
> 
> Has anyone on the list used the Cisco recommended solutions?   I am at a
> client right now with some older 2000 servers and I am manually changing
> the CST time zone here for the new dates using Microsoft's TZEdit tool.
> 
>  
> 
> I assume I could use this on the Cisco Windows 2000 based servers, but I
> haven't read up if Call Manager needs a patch for the phones to get the
> correct time.
> 
>  
> 
> If you have applied the Cisco updates/patches, does it require a reboot?
> 
>  
> 
>  
> 
> And I'd thought I'll tack this on also, I didn't see a version listed of
> CUE that will support the new DST information; is that out there and I
> missed it??
> 
>  
> 
>  
> 
> -- Brian
> 
>  
> 
> 
> --------------------------------------------------------
> This e-mail message and any attached files are confidential and are intended solely for the use of the addressee(s) named above. This communication may contain material protected by attorney-client, work product, or other privileges. If you are not the intended recipient or person responsible for delivering this confidential communication to the intended recipient, you have received this communication in error, and any review, use, dissemination, forwarding, printing, copying, or other distribution of this e-mail message and any attached files is strictly prohibited. Dickstein Shapiro reserves the right to monitor any communication that is created, received, or sent on its network.  If you have received this confidential communication in error, please notify the sender immediately by reply e-mail message and permanently delete the original message. 
> 
> To reply to our email administrator directly, send an email to postmaster at dicksteinshapiro.com
> 
> Dickstein Shapiro LLP
> http://www.DicksteinShapiro.com
> ==============================================================================