[cisco-voip] CCM 4.1(3)SR4d Maximum Ad Hoc Conference keepschanging to 4 <we have a CMM ACT that we want 8 parties to Ad Hoc)

[Voll, Scott]

Also have the CMM with ACT and I have mine set to 6 with out issue.  My
Meetme is set to 10 with out issue also.  But I'm running CM 4.1.3sr2.

 

Scott

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jason Aarons
(US)
Sent: Wednesday, February 21, 2007 10:12 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] CCM 4.1(3)SR4d Maximum Ad Hoc Conference
keepschanging to 4 <we have a CMM ACT that we want 8 parties to Ad Hoc)

 

I keep changing the Service Parameters > CallManager (X.X.X.X) >
Clusterwide Parameters (Service) > Maximum Ad Hoc Conference > 8
(suggested value 4)

 

However after a while I go back in and find the value reset to 4
(default). We have a CMM module with ACT that allows 8 parties in  Ad
Hoc.

________________________________

Disclaimer: This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the designated
addressee(s) named above only. If you are not the intended addressee,
you are hereby notified that you have received this communication in
error and that any use or reproduction of this email or its contents is
strictly prohibited and may be unlawful. If you have received this
communication in error, please notify us immediately by replying to this
message and deleting it from your computer. Thank you. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070221/dcbf7df8/attachment-0001.html