[cisco-voip] DST Testing

[Aman Chugh]

Hello List,

I am also reviewing the patchs and deciding on what to do, I just wanted to
confirm and see what other folks have done.

I am using CM 4.1.3 sr 3b with OS 2000.4.3a sr2 and Unity 4.0.5 win 2000 sp4
VM only and I do have 7970 ipphones.

This is what my plan looks like currently

1. Install OS release 4.3a sr9
2. Install CM patch
3. Install Device Pack

For Unity

1. Install Unity update patch

Is the CM patch installation order correct, Is  there anything else that I
need to install or do and what does this mean


*NOTE:  Any time you apply a Unified CallManager Engineering Special (ES) or
Service Release (SR) that does not have the Daylight Savings Time (DST)
update you must re-apply the Unified CallManager Update noted in step 3
above. *
TIA

Aman


On 2/22/07, Voll, Scott <Scott.Voll at wesd.org> wrote:
>
>  OK, I have loaded all the OS'es and patches and think I'm ready for DST
> march 11th.
>
>
>
> Can I test this?  Can I change the date on CM, IPCCx, Unity, Etc and see
> if it works?  Or will this cause me issues?  Then move it back to the
> correct date.  Am I going to screw up the DB?  I might not be here on March
> 11th / 12th and don't want to have to work remotely.
>
>
>
> Thanks
>
>
>
> Scott
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070222/ccc84975/attachment-0001.html