[cisco-voip] BARS restore

[Voll, Scott]

Not sure what you are trying to do..... but want about removing a drive
and remirroring.  If something goes wrong you just put a drive back and
you up and going.  I would do the remirroring piece with all CM's as you
wouldn't what the DB to get out of sync.

Scott

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Kalle Tetto
Sent: Thursday, February 22, 2007 10:00 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] BARS restore

Hi,

Im looking for a possibility to restore a "standby Callmanager 
Publisher" with an BARS Backup from the original CCM Publisher. I need 
this to have in the failure case the possibility to have an up to date 
Publisher which I can put "instant to the network" without doing the 
normal restore procedure. Is it possible to do do a restore from command

line? Is BARS only accessible via webinterface?

Best Regards

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip