[cisco-voip] Creating a tie-line to an Avaya for inbound calls

[Justin Steinberg]

Configuration depends on your Avaya setup.

You'll want to read this:

http://www.cisco.com/en/US/products/sw/iosswrel/ps1834/products_feature_guide09186a00800e9761.html#wp1019465

Justin

On 2/22/07, Robert Kulagowski <bob at smalltime.com> wrote:
>
> I'm replacing an Avaya that has a point-to-point tie line to another
> Avaya in a different city.
>
> On the controller t1 part, I've got:
> controller T1 0/3/0
>   framing esf
>   linecode b8zs
>   ds0-group 1 timeslots 1-24 type e&m-wink-start
>
> What are the other steps I need to do?  I'm assuming that I'd have a
> voice port and a dial-peer, but how to I glue them together?
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070222/9836df2e/attachment.html