[cisco-voip] DST Testing

Thu Feb 22 19:12:57 EST 2007

Yep.... Same  TZudater.......Just running difference command:

"X:\CommServer\cscoserv\Java2SDK\jre\bin\java -jar tzupdater.jar -u -v"

where "X" is the correct drive-letter for path "\Commserver\cscoserv"
and "u" and "v" are both lower-case letters.

________________________________

From: Aman Chugh [mailto:aman.chugh at gmail.com] 
Sent: Thursday, February 22, 2007 4:10 PM
To: Voll, Scott
Cc: CarlosOrtiz at bayviewfinancial.com; cisco-voip at puck.nether.net;
cisco-voip-bounces at puck.nether.net
Subject: Re: [cisco-voip] DST Testing

Scott,

Thats the procedure I am going to do on unity as well because JRE is
used for cisco pca and unity inbox, can I use the same file on IPCCX as
well.

Aman

On 2/22/07, Voll, Scott <Scott.Voll at wesd.org> wrote: 

Not sure about the field notice but this is what TAC had me do:

Unzip the contents of the patch from the below link to a folder of your
choice. There should now be a file present named "tzupdater.jar" 

Open a command-line window and browse to the path where "tzupdater.jar"
is located. 

d) Issue the follow from the command-line:

C:/program files/wfaviid/java/current/bin/java -jar tzupdater.jar -u -v

Done.

I think I stopped the IPCCx services, but I can't remember.

Scott

________________________________

From: Aman Chugh [mailto: aman.chugh at gmail.com] 
Sent: Thursday, February 22, 2007 3:11 PM 
To: Voll, Scott
Cc: CarlosOrtiz at bayviewfinancial.com; cisco-voip at puck.nether.net;
cisco-voip-bounces at puck.nether.net 

Subject: Re: [cisco-voip] DST Testing

Thanks to every one for replying , List was more helpfull than TAC .
Just anthor qustion for IPCCX  for the OS , I would apply the same logic
for Callmanager , but is there Java update for it aswell. if so can some
one point me to field notice for the same. 

Aman

On 2/22/07, Voll, Scott < Scott.Voll at wesd.org
<mailto:Scott.Voll at wesd.org> > wrote: 

I did the patch first then the DP.  Device Packs are not contingent on
CM upgrades unless it is specific to the install of the DP. 

IE> if the device pack will run on 4.1 you don't have to add a SR before
adding the DP.  But if it only runs on CM 5 you would need to upgrade to
5 before the DP. 

Make sense.

All the Device Pack is..... is the firmware upgrades for the phones

Scott

________________________________

From: Aman Chugh [mailto: aman.chugh at gmail.com] 
Sent: Thursday, February 22, 2007 11:21 AM 
To: CarlosOrtiz at bayviewfinancial.com
Cc: cisco-voip at puck.nether.net; cisco-voip-bounces at puck.nether.net;
Voll, Scott 

Subject: Re: [cisco-voip] DST Testing

Thats were I am confused , how did the other folks on the list did it.

On 2/22/07, CarlosOrtiz at bayviewfinancial.com
<CarlosOrtiz at bayviewfinancial.com > wrote: 

I think the Device pack is second and then CM patch third. 

Carlos. 

"Aman Chugh" < aman.chugh at gmail.com <mailto:aman.chugh at gmail.com> > 
Sent by: cisco-voip-bounces at puck.nether.net 

02/22/2007 11:50 AM 

To

"Voll, Scott" < Scott.Voll at wesd.org <mailto:Scott.Voll at wesd.org> > 

cc

cisco-voip at puck.nether.net 

Subject

Re: [cisco-voip] DST Testing

Hello List, 

I am also reviewing the patchs and deciding on what to do, I just wanted
to confirm and see what other folks have done. 

I am using CM 4.1.3 sr 3b with OS 2000.4.3a sr2 and Unity 4.0.5 win 2000
sp4 VM only and I do have 7970 ipphones. 

This is what my plan looks like currently 

1. Install OS release 4.3a sr9 
2. Install CM patch 
3. Install Device Pack 

For Unity 

1. Install Unity update patch 

Is the CM patch installation order correct, Is  there anything else that
I need to install or do and what does this mean 

NOTE:  Any time you apply a Unified CallManager Engineering Special (ES)
or Service Release (SR) that does not have the Daylight Savings Time
(DST) update you must re-apply the Unified CallManager Update noted in
step 3 above. 

TIA 

Aman

On 2/22/07, Voll, Scott < Scott.Voll at wesd.org
<mailto:Scott.Voll at wesd.org> > wrote: 
OK, I have loaded all the OS'es and patches and think I'm ready for DST
march 11 th.   

Can I test this?  Can I change the date on CM, IPCCx, Unity, Etc and see
if it works?  Or will this cause me issues?  Then move it back to the
correct date.  Am I going to screw up the DB?  I might not be here on
March 11 th / 12th and don't want to have to work remotely. 

Thanks 

Scott 

_______________________________________________
cisco-voip mailing list 
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip 

_______________________________________________
cisco-voip mailing list 
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070222/f7c60278/attachment-0001.html 