[cisco-voip] DST Testing
Brandon Peyton
bpeyton at sover.net
Thu Feb 22 19:28:53 EST 2007
So here's a question... Cisco isnt providing an official patch for any of my versions (like 3.5.2) and I dont plan to upgrade to the latest before the 11th.
I was going to manually change the clock and turn off auto DST.
I see java updates mentioned below, will I still have to perform the below steps on unity/ipcc even if I'm manually changing the clock?
----- Original Message -----
From: Voll, Scott
To: Aman Chugh
Cc: cisco-voip-bounces at puck.nether.net ; CarlosOrtiz at bayviewfinancial.com ; cisco-voip at puck.nether.net
Sent: Thursday, February 22, 2007 7:12 PM
Subject: Re: [cisco-voip] DST Testing
Yep.. Same TZudater...Just running difference command:
"X:\CommServer\cscoserv\Java2SDK\jre\bin\java -jar tzupdater.jar -u -v"
where "X" is the correct drive-letter for path "\Commserver\cscoserv" and "u" and "v" are both lower-case letters.
------------------------------------------------------------------------------
From: Aman Chugh [mailto:aman.chugh at gmail.com]
Sent: Thursday, February 22, 2007 4:10 PM
To: Voll, Scott
Cc: CarlosOrtiz at bayviewfinancial.com; cisco-voip at puck.nether.net; cisco-voip-bounces at puck.nether.net
Subject: Re: [cisco-voip] DST Testing
Scott,
Thats the procedure I am going to do on unity as well because JRE is used for cisco pca and unity inbox, can I use the same file on IPCCX as well.
Aman
On 2/22/07, Voll, Scott <Scott.Voll at wesd.org> wrote:
Not sure about the field notice but this is what TAC had me do:
Unzip the contents of the patch from the below link to a folder of your choice. There should now be a file present named "tzupdater.jar"
Open a command-line window and browse to the path where "tzupdater.jar" is located.
d) Issue the follow from the command-line:
C:/program files/wfaviid/java/current/bin/java -jar tzupdater.jar -u -v
Done.
I think I stopped the IPCCx services, but I can't remember.
Scott
------------------------------------------------------------------------------
From: Aman Chugh [mailto: aman.chugh at gmail.com]
Sent: Thursday, February 22, 2007 3:11 PM
To: Voll, Scott
Cc: CarlosOrtiz at bayviewfinancial.com; cisco-voip at puck.nether.net; cisco-voip-bounces at puck.nether.net
Subject: Re: [cisco-voip] DST Testing
Thanks to every one for replying , List was more helpfull than TAC . Just anthor qustion for IPCCX for the OS , I would apply the same logic for Callmanager , but is there Java update for it aswell. if so can some one point me to field notice for the same.
Aman
On 2/22/07, Voll, Scott < Scott.Voll at wesd.org> wrote:
I did the patch first then the DP. Device Packs are not contingent on CM upgrades unless it is specific to the install of the DP.
IE> if the device pack will run on 4.1 you don't have to add a SR before adding the DP. But if it only runs on CM 5 you would need to upgrade to 5 before the DP.
Make sense.
All the Device Pack is... is the firmware upgrades for the phones
Scott
------------------------------------------------------------------------------
From: Aman Chugh [mailto: aman.chugh at gmail.com]
Sent: Thursday, February 22, 2007 11:21 AM
To: CarlosOrtiz at bayviewfinancial.com
Cc: cisco-voip at puck.nether.net; cisco-voip-bounces at puck.nether.net; Voll, Scott
Subject: Re: [cisco-voip] DST Testing
Thats were I am confused , how did the other folks on the list did it.
On 2/22/07, CarlosOrtiz at bayviewfinancial.com <CarlosOrtiz at bayviewfinancial.com > wrote:
I think the Device pack is second and then CM patch third.
Carlos.
"Aman Chugh" < aman.chugh at gmail.com >
Sent by: cisco-voip-bounces at puck.nether.net
02/22/2007 11:50 AM
To
"Voll, Scott" < Scott.Voll at wesd.org >
cc
cisco-voip at puck.nether.net
Subject
Re: [cisco-voip] DST Testing
Hello List,
I am also reviewing the patchs and deciding on what to do, I just wanted to confirm and see what other folks have done.
I am using CM 4.1.3 sr 3b with OS 2000.4.3a sr2 and Unity 4.0.5 win 2000 sp4 VM only and I do have 7970 ipphones.
This is what my plan looks like currently
1. Install OS release 4.3a sr9
2. Install CM patch
3. Install Device Pack
For Unity
1. Install Unity update patch
Is the CM patch installation order correct, Is there anything else that I need to install or do and what does this mean
NOTE: Any time you apply a Unified CallManager Engineering Special (ES) or Service Release (SR) that does not have the Daylight Savings Time (DST) update you must re-apply the Unified CallManager Update noted in step 3 above.
TIA
Aman
On 2/22/07, Voll, Scott < Scott.Voll at wesd.org> wrote:
OK, I have loaded all the OS'es and patches and think I'm ready for DST march 11 th.
Can I test this? Can I change the date on CM, IPCCx, Unity, Etc and see if it works? Or will this cause me issues? Then move it back to the correct date. Am I going to screw up the DB? I might not be here on March 11 th / 12th and don't want to have to work remotely.
Thanks
Scott
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
------------------------------------------------------------------------------
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070222/69fa6427/attachment-0001.html
More information about the cisco-voip
mailing list