[cisco-voip] Conference using an analog phone (fxs) with CME?

[Jeff Anderson]

I just reconfigured the analog port to be skinny controlled by the CME router and I was able to successfully conference a third party onto the call with an analog polycom speaker phone.

When you remove the destination-pattern from the dial-peer and add "service stcapp" it will create a new ephone that doesn't show up in the running config. You will see it if you type "show ephone". Then you need to go into the running config and go into the ephone that was just created. You then need to define the mac-address. You can obtain that from the "sh ephone" command. In my case it was the fa0/0 mac with the last first two characters removed and 01 added to the end. You define the ephone-dn's like you would any other CME phone and apply it to the newly created ephone.

-jeff


-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jeff Anderson
Sent: Friday, February 23, 2007 9:53 AM
To: Jonathan Charles
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Conference using an analog phone (fxs) with CME?

I think I found my answer. I still need to test to confirm that it works. According to the following document it is possible.

http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124newft/124t/124t2/ht1vg224.htm#wp1178205

The way you bring on a conference participant is to press hook-flash, dial the third party and press hookflash again to conference them on.

-jeff


________________________________________
From: Jonathan Charles [mailto:jonvoip at gmail.com]
Sent: Friday, February 23, 2007 9:24 AM
To: Jeff Anderson
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Conference using an analog phone (fxs) with CME?

Well, out of curiosity, how do you expect the pots phone to communicate to CME that it wants to conference?

IOW, no.

You can use an IP phone to conference on the pots phone however...



Jonathan
On 2/22/07, Jeff Anderson <janderson at enventis.com> wrote:
Is it possible for an analog phone connected to an FXS port on a CME router to conference in another party? If it is possible, does someone have a configuration example or document explaining how to do it.

Thanks,

Jeff


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip