[cisco-voip] multiple local area codes problem

Paul Choi asobihoudai at yahoo.com
Fri Feb 23 14:40:56 EST 2007


Matt,

Good question. I think I need to talk to the customer
a bit more on this. Grrrrr...

--- "Matt Slaga (US)" <Matt.Slaga at us.didata.com>
wrote:

> I think you are trying to take a location where 10
> digit dialing is
> required and convert them to seven digit dialing.  
> 
>  
> 
> What happens if one local area code's seven digit
> number overlaps with
> another local area code's seven digit number?
> 
>  
> 
>  
> 
>  
> 
>  
> 
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On
> Behalf Of Lelio Fulgenzi
> Sent: Friday, February 23, 2007 2:00 PM
> To: Paul Choi; cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] multiple local area codes
> problem
> 
>  
> 
> There will always be multiple ways to do something,
> but here, we use a
> 9.@ route pattern with a route filter that (among
> other things) allows
> calls with 'local area code does not exist'
> 
>  
> 
>
------------------------------------------------------------------------
> --------
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph *
> Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
>
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> 
> ....there's no such thing as a bad timbit...
> 
> 	----- Original Message ----- 
> 
> 	From: Paul Choi <mailto:asobihoudai at yahoo.com>  
> 
> 	To: cisco-voip at puck.nether.net 
> 
> 	Sent: Friday, February 23, 2007 1:50 PM
> 
> 	Subject: [cisco-voip] multiple local area codes
> problem
> 
> 	 
> 
> 	I have a customer that is located within three
> local
> 	area codes. They're connected to a remote CCM
> cluster.
> 	
> 	
> 	How can I configure the gateway and/or the CCM
> cluster
> 	so they do not have to dial the area code for all
> 	local calls?
> 	
> 	This site has three E&M DID lines for all inbound
> 	calls, one dedicated FXS line for faxes, and five
> FXO
> 	lines for outbound calls only of which three seem
> to
> 	be working properly. This is extra information that
> is
> 	unrelated to my question but I thought I'd put it
> in
> 	here for the record.
> 	
> 	
> 	 
> 	
>
________________________________________________________________________
> ____________
> 	Have a burning question?  
> 	Go to www.Answers.yahoo.com and get answers from
> real people who
> know.
> 	_______________________________________________
> 	cisco-voip mailing list
> 	cisco-voip at puck.nether.net
> 	https://puck.nether.net/mailman/listinfo/cisco-voip
> 
> 
> 
> -----------------------------------------
> Disclaimer:
> 
> This e-mail communication and any attachments may
> contain
> confidential and privileged information and is for
> use by the
> designated addressee(s) named above only.  If you
> are not the
> intended addressee, you are hereby notified that you
> have received
> this communication in error and that any use or
> reproduction of
> this email or its contents is strictly prohibited
> and may be
> unlawful.  If you have received this communication
> in error, please
> notify us immediately by replying to this message
> and deleting it
> from your computer. Thank you.



 
____________________________________________________________________________________
Do you Yahoo!?
Everyone is raving about the all-new Yahoo! Mail beta.
http://new.mail.yahoo.com


More information about the cisco-voip mailing list