[cisco-voip] pot line with mgcp drops

[Jonathan Charles]

Well, if it is an FXO, is it a DID? If not, is there a PLAR statement or an
attendant DN assigned?

Does it go fast busy, or does it ring forever?

If it is an FXO DID, is the telco sending digits? If not, the port is
kicking the call cuz it isn't getting the right signaling...

Or...

<the rantings of an insane person>

The port is bad, you have bad DSPs, the line got gnawed thru by a chipmunk
who thought it was the thread holding up the sword of Damocles (and he
really hated Damocles...)

</the rantings of an insane person>




Jonathan

On 2/24/07, James Grace <jgrace at adcapnet.com> wrote:
>
> ? Im configuring a FXO port with mgcp GW.  For some reason when i call in
> on the pots number ...the port goes off hook for a sec and back on.  Seem
> that it goes off hook with every ring.  am i having a voltage issue.
>
>  James Grace
>
> Systems Engineer
> Adcap Network Systems, Inc.
> 6865 Shiloh Road East, Suite 250
> Alpharetta, GA 30005
>
> office: 678-456-6986
> direct: 678-456-6761
> jgrace at adcapnet.com
> www.adcapnet.com
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070224/ad2a8d50/attachment.html