[cisco-voip] MCS 7825-H1 OS Installation

[George.Scott at ins.com]

Interesting.  Installed 6 MCS 7845's this week and 3 failed on the first
try.  A second try worked on all three.


------------------------------

Message: 4
Date: Sat, 24 Feb 2007 20:40:17 -0600
From: "Carter, Bill" <bcarter at sentinel.com>
Subject: Re: [cisco-voip] MCS 7825-H1 OS Installation
To: "Jonathan Charles" <jonvoip at gmail.com>
Cc: cisco-voip at puck.nether.net
Message-ID:
	<6A0744639B86DD459433108DBF101D260144E5DC at MAIL01.sentinel.com>
Content-Type: text/plain; charset="us-ascii"

I had this same error about 5 times last week.  Never talked to TAC, but
I found formatting the disk from within the RAID utility fixed it.

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jonathan
Charles
Sent: Friday, February 23, 2007 9:21 AM
To: Johnny Crothers
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] MCS 7825-H1 OS Installation


Yeah, we ran into the same problem and that is what TAC told us to do.



Jonathan


On 2/23/07, Johnny Crothers < Johnny.Crothers at vanco.co.uk
<mailto:Johnny.Crothers at vanco.co.uk> > wrote: 

	Worked a treat!! Thanks a lot!!

	 

	
________________________________


	From: Jonathan Charles [mailto:jonvoip at gmail.com] 
	Sent: 23 February 2007 08:08
	To: Johnny Crothers
	Cc: cisco-voip at puck.nether.net
	Subject: Re: [cisco-voip] MCS 7825-H1 OS Installation

	 

	Low level format the hard drives and start over... I have seen
this before... the LLF fixes it.
	
	
	
	
	Jonathan

	On 2/22/07, Johnny Crothers < Johnny.Crothers at vanco.co.uk>
wrote:

	Anyone had any problems installing OS 4.3(a) on these servers?
I'm getting an error during the image transfer saying 

	 

	"The transfer of the OD Image to the hard driver failed!

	This can be caused by scratched or smudged DVD-ROM media or

	A hardware failure within the servers"

	 

	The CD's are out of the box, never used. I've also tried to
install the 2.4 OS install, but that comes back saying that this OS
doesn't support the hardware.

	 

	Before I go back and get another copy of the CD's.. is there
something I'm doing wrong?? I've installed a few CCM's but never come
across this before.

	 

	Any help out there?	 

	Cheers, 

	Johnny