[cisco-voip] TTY Device

[Lelio Fulgenzi]

I tested a TTY device on a VG248 with our local Hearing Society without any problems. They will likely need a DID to connect though. I believe I tested both direct connection and with an analog phone and a coupler.

I'd say you got a good chance of things working out OK.

--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
...there's no such thing as a bad timbit...

  ----- Original Message ----- 
  From: Ed Leatherman 
  To: cisco-voip at puck.nether.net 
  Sent: Monday, February 26, 2007 1:09 PM
  Subject: [cisco-voip] TTY Device


  Has anyone had to setup a TTY phone on VOIP? We are getting ready to convert our disability services office and they have one.. they tell me its just a POTS line, but they don't know anything more about it (trying to get them to send me the model etc). I want to make sure they arent going to run into any trouble if I give them a line off a VG248. How do they generally work? 

  Thanks!

  -- 
  Ed Leatherman
  Senior Voice Engineer
  West Virginia University
  Telecommunications and Network Operations 


------------------------------------------------------------------------------


  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070226/68127662/attachment-0001.html