[cisco-voip] Open a door by using a Cisco ip phone

[Ryan Ratliff]

That's way simpler than my suggestion :)

-Ryan

On Feb 26, 2007, at 7:17 PM, Voll, Scott wrote:

I can only talk about the door.

If your using a mag-lock system call your vendor.  Then it's just a
matter of hooking it up to your ATA.

We have this kind of system and it's just DTMF from the answering phone
to the door lock system to have it open.

Scott

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of
cisco at ip-project.com
Sent: Monday, February 26, 2007 3:47 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Open a door by using a Cisco ip phone

Hey all,
we would like to press a button on a 79xx phone to initiate a door
opener. I've searched, but only found one commercial application
(ANDtek) with no technical details. How do I connect the door opener? Do
I need a PC with a serial port? Or is it some kind of analog phone with
that functionality connected through an ATA? And what piece of software
do I need?
And second, connecting any kind of webcam or surveillance cam to the
network and watching the output on a 797x would be fine. Again, what
cameras do I need, and what piece of software?

Any links?

Thanks,
Hans-Peter
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip