[cisco-voip] Open a door by using a Cisco ip phone

[Jason Aarons (US)]

Valcom makes single and four door control units, use a FXO interface. If
you use FXS/ATA you may have disconnect-supervision issues.

Valcom pre-sales is really good, call them.

http://www.valcom.com/doorsecurity.htm


-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Voll, Scott
Sent: Monday, February 26, 2007 7:18 PM
To: cisco at ip-project.com; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Open a door by using a Cisco ip phone

I can only talk about the door.  

If your using a mag-lock system call your vendor.  Then it's just a
matter of hooking it up to your ATA.

We have this kind of system and it's just DTMF from the answering phone
to the door lock system to have it open.

Scott

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of
cisco at ip-project.com
Sent: Monday, February 26, 2007 3:47 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Open a door by using a Cisco ip phone

Hey all,
we would like to press a button on a 79xx phone to initiate a door
opener. I've searched, but only found one commercial application
(ANDtek) with no technical details. How do I connect the door opener? Do
I need a PC with a serial port? Or is it some kind of analog phone with
that functionality connected through an ATA? And what piece of software
do I need? 
And second, connecting any kind of webcam or surveillance cam to the
network and watching the output on a 797x would be fine. Again, what
cameras do I need, and what piece of software?

Any links? 

Thanks,
Hans-Peter
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.