[cisco-voip] dialpeers and trunk groups

[Lelio Fulgenzi]

I'm trying to get trunk groups working. I've followed the steps in the book, but I'm getting failures when trying to make the call. When I remove the trunkgroup on the dialpeer and add the port, calls go through fine. The dialpeer shows up and running (as far as I can tell). Anyone know what I might be missing?

!
trunk group  uogdev_pstn_tg
 hunt-scheme round-robin
!
trunk group  uogdev_911_tg
 hunt-scheme sequential
!
controller T1 3/0
 framing esf
 linecode b8zs
 pri-group timeslots 1-24 service mgcp
 trunk-group uogdev_pstn_tg timeslots 2-23
 trunk-group uogdev_911_tg timeslots 1
!
dial-peer voice 9519901 pots
 trunkgroup uogdev_pstn_tg
 corlist outgoing uogdev-local-css
 destination-pattern 9519.......
 forward-digits 10
!

--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
...there's no such thing as a bad timbit...
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070227/0263d8e7/attachment.html