[cisco-voip] ccm and quintum or any vendor's gateway for 16 fxo ports?

[tusker keg]

howdy

Dont know if this was related to my setup,

recently i had situation, ( callmanager 5.0  + h323 quintum tenor) ,
calls  from the callmanager cluster to  the tenor  was not giving
ringback tone,

vendor a blamed vendor b , didnt ask vendor b cause calls to other
vendors  equipment where giving ringback tone.

eventually decided to use open source sip proxy as an intermediary


just fyi

On 2/27/07, Jonathan Charles <jonvoip at gmail.com> wrote:
> If it is a true H.323 gateway, you should be able to set it up via CCM as an
> H.323 gateway...
>
>
>
> Jonathan
>
>
> On 2/27/07, gokhan senol < gokhanciscottl at yahoo.com> wrote:
> >
> >
> >
> >
> >
> > hi everybody
> >
> >
> >
> > i got ccm 4.1.3 and 2821 router as gateway. gateway and ccm uses mgcp.
> >
> > i need 16 fxo ports for my GSM lines. i wanna use external gateway
> >
> > can i use quintum or another vendor's product for GSM lines, is it
> possible to use it by registering to CCM via h323
> >
> >
> >
> > and idea?
> >
> > thanks
> >
> >
> > ________________________________
> Never Miss an Email
> > Stay connected with Yahoo! Mail on your mobile. Get started!
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
> >
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>