[cisco-voip] MeetingPlace 5.4 video integration with anIPVC-3545-MCU

[Timur Bayazitov]

1. Read MeetingPlace section in Unified Communication  SRND for ccm 5.0, all
MCUs _must_ register with Video Administration internal gatekeeper.
2. Check that External conference authorization policy is set to "none" in
MCU settings->advanced tab.
3 You need to select  IPVC-36XX v5.x.

Best regards, Timur Bayazitov 

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Patrick Mowry
Sent: Tuesday, February 27, 2007 11:03 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] MeetingPlace 5.4 video integration with
anIPVC-3545-MCU

Hello,
  Anyone using the MeetingPlace video integrtation?  I'm having no luck
getting it going and I figured I'd try the list while I wait on TAC.

Whenever I try to schedule a meeting from the Meetingplace Video
Administration page, a telnet session to the MCU gives me the following
errors:

1034619 ERROR    Ec Manager |Can't find. Type is Conference Authorizer
1034619 DEBUG2   GCC Control|CONF (0)0xd9d1b00: Conference not
authorized

Part of the problem may be that the Video administration resource management
will let me define the MCM gatekeeper I have, but it will only allow me to
define the MCU as attached to the default local_gatekeeper.  And along those
lines the options I have for MCU are IPVC-36XX v5.x or the IPVC3540 v4.x
when what I have is a 3545 MCU running 5.1.

Thanks for any suggestions,

-Patrick

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip