[cisco-voip] Consensus for troubleshooting CCM IP phone registration when connectivity is confirmed...

[Jonathan Charles]

Actually, the biggest thing I have found that generally always works, is to
hard code the port for the voice vlan...  after that, even the most pesky
phone registers...


Jonathan

On 2/28/07, Paul Choi <asobihoudai at yahoo.com> wrote:
>
> Is there a decent methodology to troubleshoot IP phone
> CCM registration when end-to-end connectivity has
> already been confirmed?
>
> My thoughts are the first clues would be shown under
> 'debug sccp all' on the local gateway. Does anyone
> have any other hints besides what I have already? I
> honestly don't remember the order of tasks on the CCM
> cluster to register telephones. I would greatly
> appreciate it if someone would please provide a
> general summary of what needs to be finished on the
> CCM cluster before registering IP phones on a remote
> gateway.
>
> Cheers
>
>
>
>
> ____________________________________________________________________________________
> Cheap talk?
> Check out Yahoo! Messenger's low PC-to-Phone call rates.
> http://voice.yahoo.com
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070228/1e329b26/attachment.html