[cisco-voip] dialpeers and trunk groups

[Christopher M. Bomba]

Try putting the trunk-group commands on the voice-port 3/0:23 instead of the controller.

Chris

_________________________________________________________________________________

Message: 1
Date: Tue, 27 Feb 2007 13:53:12 -0500
From: "Lelio Fulgenzi" <lelio at uoguelph.ca>
Subject: [cisco-voip] dialpeers and trunk groups
To: <cisco-voip at puck.nether.net>
Message-ID: <02f401c75aa0$87d37d40$47196883 at cfs.uoguelph.ca>
Content-Type: text/plain; charset="iso-8859-1"

I'm trying to get trunk groups working. I've followed the steps in the book, but I'm getting failures when trying to make the call. When I remove the trunkgroup on the dialpeer and add the port, calls go through fine. The dialpeer shows up and running (as far as I can tell). Anyone know what I might be missing?

!
trunk group  uogdev_pstn_tg
 hunt-scheme round-robin
!
trunk group  uogdev_911_tg
 hunt-scheme sequential
!
controller T1 3/0
 framing esf
 linecode b8zs
 pri-group timeslots 1-24 service mgcp
 trunk-group uogdev_pstn_tg timeslots 2-23
 trunk-group uogdev_911_tg timeslots 1
!
dial-peer voice 9519901 pots
 trunkgroup uogdev_pstn_tg
 corlist outgoing uogdev-local-css
 destination-pattern 9519.......
 forward-digits 10