[cisco-voip] dialpeers and trunk groups

Christopher M. Bomba cbomba at s4nets.com
Wed Feb 28 11:05:06 EST 2007


I have never created trunk ports on digital circuits before.  It might only work for analog ports.



trunk-group (interface)    Assigns an ISDN PRI or NFAS interface to a trunk group


Try that I saw that on Cisco's site.

Chris


-----Original Message-----
From: Lelio Fulgenzi <lelio at uoguelph.ca>
Sent: Wed, February 28, 2007 10:45 am
To: cbomba at s4nets.com
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] dialpeers and trunk groups

No luck. Gave me that same error before about only for analog ports. I tried applying directly to serial port, no errors, and the dial peer seems active, but errors out.

I'm TAC'ing it.

--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
...there's no such thing as a bad timbit...

  ----- Original Message ----- 
  From: Christopher M. Bomba 
  To: Lelio Fulgenzi 
  Cc: cisco-voip at puck.nether.net 
  Sent: Wednesday, February 28, 2007 10:11 AM
  Subject: Re: [cisco-voip] dialpeers and trunk groups


  Yeah anytime I create trunk groups I create them on FXO ports, but I have to associate the voice-port to the trunk group.

  trunk group  FXO-PORTS
   max-calls any 3
   description "Trunk Group for FXO Ports"
   hunt-scheme round-robin

  voice-port 0/2/0
   trunk-group FXO-PORTS
   no vad
   no comfort-noise
   connection plar 909
   caller-id enable
  !
  voice-port 0/2/1
   trunk-group FXO-PORTS
   no vad
   no comfort-noise
   connection plar 909
   caller-id enable
  !
  voice-port 0/2/2
   trunk-group FXO-PORTS
   no vad
   no comfort-noise
   connection plar 909
   caller-id enable

  dial-peer voice 10 pots
   trunkgroup FXO-PORTS
   description Emergency 911
   preference 1
   destination-pattern 911
   forward-digits all



  -----Original Message-----
  From: Lelio Fulgenzi <lelio at uoguelph.ca>
  Sent: Wed, February 28, 2007 9:33 am
  To: cbomba at s4nets.com, cisco-voip at puck.nether.net
  Subject: Re: [cisco-voip] dialpeers and trunk groups

  Pretty sure I tried that and it wouldn't take the command. Or did I try the serial port? Can't remember.

  --------------------------------------------------------------------------------
  Lelio Fulgenzi, B.A.
  Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
  (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
  ...there's no such thing as a bad timbit...

    ----- Original Message ----- 
    From: Christopher M. Bomba 
    To: cisco-voip at puck.nether.net 
    Sent: Wednesday, February 28, 2007 8:14 AM
    Subject: [cisco-voip] dialpeers and trunk groups


    Try putting the trunk-group commands on the voice-port 3/0:23 instead of the controller.

    Chris

    _________________________________________________________________________________

    Message: 1
    Date: Tue, 27 Feb 2007 13:53:12 -0500
    From: "Lelio Fulgenzi" <lelio at uoguelph.ca>
    Subject: [cisco-voip] dialpeers and trunk groups
    To: <cisco-voip at puck.nether.net>
    Message-ID: <02f401c75aa0$87d37d40$47196883 at cfs.uoguelph.ca>
    Content-Type: text/plain; charset="iso-8859-1"

    I'm trying to get trunk groups working. I've followed the steps in the book, but I'm getting failures when trying to make the call. When I remove the trunkgroup on the dialpeer and add the port, calls go through fine. The dialpeer shows up and running (as far as I can tell). Anyone know what I might be missing?

    !
    trunk group  uogdev_pstn_tg
     hunt-scheme round-robin
    !
    trunk group  uogdev_911_tg
     hunt-scheme sequential
    !
    controller T1 3/0
     framing esf
     linecode b8zs
     pri-group timeslots 1-24 service mgcp
     trunk-group uogdev_pstn_tg timeslots 2-23
     trunk-group uogdev_911_tg timeslots 1
    !
    dial-peer voice 9519901 pots
     trunkgroup uogdev_pstn_tg
     corlist outgoing uogdev-local-css
     destination-pattern 9519.......
     forward-digits 10

    _______________________________________________
    cisco-voip mailing list
    cisco-voip at puck.nether.net
    https://puck.nether.net/mailman/listinfo/cisco-voip




More information about the cisco-voip mailing list