[cisco-voip] Bunding PRIs in H323 dial-peer pots?

[Wes Sisk]

use same destination-pattern and the perference command the same way you 
would for voip redundancy:
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_configuration_example09186a0080094852.shtml

/Wes

Jason Aarons (US) wrote:
>
> Once all the channels fill up on 1/1:23 how do I tell the router to 
> use ½:23? Huntstop?
>
>  
>
>  
>
> dial-peer voice 5000 pots
>
>  description Route LD to Avaya Port 1/1:23 Primary T1PRI
>
>  destination-pattern 91..........
>
>  port 1/1:23
>
>  forward-digits all
>
> !
>
> dial-peer voice 5000 pots
>
>  description Route LD to Avaya Port 1/2:23 Second T1PRI
>
>  destination-pattern 91..........
>
>  port 1/1:23
>
>  forward-digits all
>
> ------------------------------------------------------------------------
>
> *Disclaimer: This e-mail communication and any attachments may contain 
> confidential and privileged information and is for use by the 
> designated addressee(s) named above only. If you are not the intended 
> addressee, you are hereby notified that you have received this 
> communication in error and that any use or reproduction of this email 
> or its contents is strictly prohibited and may be unlawful. If you 
> have received this communication in error, please notify us 
> immediately by replying to this message and deleting it from your 
> computer. Thank you. *
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070116/38e4cdc4/attachment.html