[cisco-voip] ATA186 MAC address Question

[Nasser Khwaja]

Also, I have seen an issue, where I can ping the ATA, but cannot browse to
it? even though I have verified there are security blockages; so if somehow
http access to the ata gets disabled, how can I reeable it?


On 1/22/07, Robert Singleton <rsingleton at novateck.com> wrote:
>
> On Sun, 2007-01-21 at 04:59 -0800, Zevier Thoran wrote:
> > Hi,
> > I just got a new ATA186. The MAC address that appears when I browse to
> > it by http://ip_address/dev
> > is totally different from the MAC address that is factory printed on
> > the bottom of the box! Why is it so and which one is the REAL mac
> > address?
>
> My first thought is that perhaps you are browsing to the wrong ATA. I
> can't even count how many times I've done that, but then I have about
> 100 of them to choose from.
>
> Beyond that, perhaps the hardware in the box has been changed out?
>
> If you are indeed browsing to the correct ATA, I would think that the
> one reported on the page would be correct.
>
> Perhaps arp can help verify that the IP address and MAC address match.
>
> Robert
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070122/3fe0b38b/attachment.html