[cisco-voip] voice gateway - trace a call

[Ryan Ratliff]

The 'debug isdn q931' is a very low-impact debug.   You can safely  
run it without fear of rebooting your router :)

-Ryan

On Jan 31, 2007, at 11:34 AM, kevin k wrote:

i am seeing only "debug" so far.  so is there any regular and safe  
"show" command?  it would be very cool if so.

On 1/31/07, Voll, Scott <Scott.Voll at wesd.org> wrote:
Debug isdn q931 will give you a lot of information for this kind of  
problem.


Scott


From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip- 
bounces at puck.nether.net] On Behalf Of kevin k
Sent: Wednesday, January 31, 2007 6:30 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] voice gateway - trace a call


i am fairly new on voip.  but reading to get better.


i have user complaining that they get busy signal but only a few  
(less thatn 10) are on the phone.  they have a pri line.  so this is  
what i did to trouble shoot.


i associate myself to their partition and css.

the gateway is in the same same partition.

i make a call and execute "show voice port summary"


is there any way i can see which line i am using?  even debug but i  
want to stay away from debug.



thanks


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip