[cisco-voip] one MGCP endpoint fails to register to CCM5
Ocampo, Walter
WOCAMPO at broward.org
Tue Jul 3 10:48:57 EDT 2007
Jefflin,
Do a MGCP debug and look what is the information the port is sending to
the call manager or if you can posted we can take a look.
Regards,
Walter Ocampo
System Network Analyst
Office of Information Technology
540 S.E 3rd. Ave, Suite 300
Fort Lauderdale, FL 33301
(954) 357 8041 Cell (954) 632 8228
wocampo at broward.org <mailto:wocampo at broward.org>
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jefflin Choi
Sent: Tuesday, July 03, 2007 7:02 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] one MGCP endpoint fails to register to CCM5
Hi All,
I am encountering an issue where a port doesn't register on the CCM
5.0.4 via MGCP.
All other ports register fine without problem. Same router, same module
and card, same configs. VIC2-4FXO card.
Tried:
No mgcp/mgcp
reset gateway
remove/reapply configs
The router registers fine. Only one endpoint is unsuccessful in
registering.
Any idea or debugs/logs to enable to determine the problem.
Thanks,
Jeff
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070703/f54b4d5c/attachment.html
More information about the cisco-voip
mailing list