[cisco-voip] Conference with G.711 and G.729

[Voll, Scott]

You are correct.  You need DSP resources setup to conference /
transcode.

Scott

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Paul Choi
Sent: Thursday, July 05, 2007 1:04 AM
To: Reto Gassmann; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Conference with G.711 and G.729

Usually transcoding is done via DSPs installed in the
gateways or via a hardware MTP which is likely packed
with DSPs also. This is my understanding and I could
very likely be incorrect.

--- Reto Gassmann <voip at mrga.ch> wrote:

> Hi all
> we run a CM 4.2(3) and have some phones wih G729 and
> some phones with G711. It
> is not possible to set up a conference between G729
> and G711 phones.
> What do I need if I want to enable conferences
> between G711 and G729 phones?
> 
> Cisco writes about transcoders, but as it seems all
> of them are hardware based.
> So if I understand that right: the CallManger itself
> is not able to do the
> transcoding work.
> 
> Thanks for feedback
> Reto
> 
> 
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 



 
________________________________________________________________________
____________
Shape Yahoo! in your own image.  Join our Network Research Panel today!
http://surveylink.yahoo.com/gmrs/yahoo_panel_invite.asp?a=7 


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip