[cisco-voip] synchronize CME and CM

[Paul Choi]

Since these products are totally separate from one
another, you'll most likely have to just take the
punch to the gut and manually configure these
features. We're using 4.1(3) and I don't see anything
like this available.

--- Kalle Tetto <tettokalle at hotmail.com> wrote:

> Hi,
> 
> I'm looking for a tool, to synchronize the CME
> config with CM, for CME 
> SRST, so that I can keep the configs up to date.
> 
> In the case of WAN outage the CME can then deliver
> AA and Hunt group 
> features, shared lines, overlay DNs and so on.
> 
> Is there a product, which could fulfil these
> requirements?
> 
> Many Thanks
> Cheers
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 



       
____________________________________________________________________________________
Choose the right car based on your needs.  Check out Yahoo! Autos new Car Finder tool.
http://autos.yahoo.com/carfinder/