[cisco-voip] one MGCP endpoint fails to register to CCM5

[Jonathan Charles]

What IOS on the router?

Jonathan

On 7/13/07, Jefflin Choi <jefflin.choi at gmail.com> wrote:
> Sorry for taking this long. Been busy lately.
>
> Here's the debug output.
>
> Thanks,
> Jeff
>
> On 7/3/07, Ocampo, Walter <WOCAMPO at broward.org> wrote:
> >
> >
> >
> > Jefflin,
> >
> >
> >
> > Do a MGCP debug and look what is the information the port is sending to the
> > call manager or if you can posted we can take a look.
> >
> >
> >
> > Regards,
> >
> >
> >
> > Walter Ocampo
> >
> > System Network Analyst
> >
> > Office of Information Technology
> >
> > 540 S.E 3rd. Ave, Suite 300
> >
> > Fort Lauderdale, FL 33301
> >
> > (954) 357 8041 Cell (954) 632 8228
> >
> > wocampo at broward.org
> >
> >
> >
> >
> > From: cisco-voip-bounces at puck.nether.net
> > [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of
> > Jefflin Choi
> > Sent: Tuesday, July 03, 2007 7:02 AM
> > To: cisco-voip at puck.nether.net
> > Subject: [cisco-voip] one MGCP endpoint fails to register to CCM5
> >
> >
> >
> >
> >
> > Hi All,
> >
> >
> >
> >
> >
> > I am encountering an issue where a port doesn't register on the CCM 5.0.4
> > via MGCP.
> >
> >
> > All other ports register fine without problem. Same router, same module and
> > card, same configs. VIC2-4FXO card.
> >
> >
> >
> >
> >
> > Tried:
> >
> >
> > No mgcp/mgcp
> >
> >
> > reset gateway
> >
> >
> > remove/reapply configs
> >
> >
> >
> >
> >
> > The router registers fine. Only one endpoint is unsuccessful in registering.
> >
> >
> >
> >
> >
> > Any idea or debugs/logs to enable to determine the problem.
> >
> >
> >
> >
> >
> > Thanks,
> >
> >
> > Jeff
> >
> >
> >
> >
> >
> >
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>