[cisco-voip] Unity Admin page keeps getting hung up

[Jonathan Charles]

We actually set up a scheduled task to issue an iisreset every night
at midnight...


Jonathan

On 7/16/07, Luis Valdes <levaldes at ndsi.com> wrote:
>
>
>
>
> Mike,
>
>
>
> I had the same problem with two Unity servers, next you will find a fix to
> that.
>
> This problem usually happens when SAWEB session expires.
>
>
>
> Please perform the following steps:
>
> Start>Administrative Tools>Internet Information Services (IIS) Manager
>
> Once this MMC opens you will see your Unity server name
>
> Expand the + beside the Unity server name
>
> You should see a yellow folder named "Web Sites"
>
> Right Click on that yellow folder named "Web Sites" and select Properties
>
> This will open the Web Site Properties Box
>
> Locate the "Service" Tab at the top, select it
>
> At the top of the service tab, there will be a box titled Isolation Mode
>
> Look to see if the box is checked. If it is checked, please continue to
> follow these steps
>
> Please UNCHECK the box beside the "Run WWW service in IIS 5.0 isolation mode
>
> Once this is cleared, if it was checked, click "Apply"
>
> At this point you simply need to run the IISreset command from the command
> line.
>
> Finally reset  IIS.
>
>
>
> Luis Valdes
>
> levaldes at ndsi.com
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>