[cisco-voip] Shared Line with 7941 and MGCP/EVM-HD-8FXS

[Lelio Fulgenzi]

 think barge definately works differently. but now that they have cBarge, you can now barge in on an analog shared line. i can't remember if it pushes a tone down the line or not.
  ----- Original Message ----- 
  From: Jason Aarons (US) 
  To: cisco-voip at puck.nether.net 
  Sent: Sunday, July 22, 2007 10:11 PM
  Subject: [cisco-voip] Shared Line with 7941 and MGCP/EVM-HD-8FXS


  I have a conference room with a SCCP/7941 and a analog Polycom SoundStation2 on a EVM-HD-8FXS (MGCP) with the same dn on both devices.  I've noticed the shared lines don't work exactly like two SCCP 7941s. It appears a lot of shared features require both sides be SCCP devices, which makes sense.

   

  Anyone else tried this same setup.

   

  In general do others give the two devices different numbers or tried the same number?

   

  CallManager 4.1(3)

   



------------------------------------------------------------------------------


  Disclaimer: This e-mail communication and any attachments may contain confidential and privileged information and is for use by the designated addressee(s) named above only. If you are not the intended addressee, you are hereby notified that you have received this communication in error and that any use or reproduction of this email or its contents is strictly prohibited and may be unlawful. If you have received this communication in error, please notify us immediately by replying to this message and deleting it from your computer. Thank you. 



------------------------------------------------------------------------------


  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070722/9c15e93d/attachment.html