[cisco-voip] CCM-based CAC and gatekeeper CAC

[Voll, Scott]

I see your point.
 
What kind of H323 end points?  Tandberg can run SCCP on CM.
 
Scott

________________________________

From: c3voip [mailto:c3voip at nc.rr.com] 
Sent: Tuesday, July 24, 2007 1:54 PM
To: Voll, Scott; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] CCM-based CAC and gatekeeper CAC



The H.323 devices aren't the problem.  

 

The problem is that the 7985's are SCCP and the CallManager doesn't know
about the gatekeeper and it's zones, so it is going to allow a call
between two 7985's, 1 at our main campus and 1 at a remote office as
long as the CCM is configured to allow at least one video call.

 

Is there a way for the CCM or the gatekeeper to "know" about all calls
without converting our remote office voice routers to CCME?

 

-C

 

From: Voll, Scott [mailto:Scott.Voll at wesd.org] 
Sent: Tuesday, July 24, 2007 4:38 PM
To: c3voip; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] CCM-based CAC and gatekeeper CAC

 

What kind of H323 endpoints?  

 

Bandwidth for the h323 devices is done with the gatekeeper.  just setup
zones and bandwidth.

 

Scott

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of c3voip
Sent: Tuesday, July 24, 2007 12:30 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] CCM-based CAC and gatekeeper CAC

We currently have a CCM centralized call processing model with remote
offices that have local PRI's and are running SRST configs.  We also
have H.323 video conference systems controlled by a gatekeeper at those
remote offices.

 

Can anyone recommend a way to add 7985's to those remote offices and be
able to control bandwidth/CAC for the H.323 devices and the 7985's?  Is
it even possible?

 

-C

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070724/e718a967/attachment.html