[cisco-voip] Callmanager 3.3 to 7206 IPIP-GW
Mark Holloway
mh at markholloway.com
Mon Jul 30 10:22:04 EDT 2007
One way audio is usually a NAT problem. Does the issue happen with VoIP to
VoIP calls or just VoIP to PSTN?
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ryan Fields
Sent: Monday, July 30, 2007 4:25 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Callmanager 3.3 to 7206 IPIP-GW
Hi All,
I'm currently working on a callmanager 3.3 to place calls through a 7206
IPIP-GW.
Here is my current setup:
(Caller) IP Phone -> CCM -> IPIPGW -> AS5400 -> TDM -> Phone (Receiver)
My problem is that the audio is only one-way, no audio on the caller's end;
the receiver
can hear the caller.
I've set the IPIP-GW as an inter-cluster trunk on the CCM and had the MTP
enabled and
disabled, but I still get the same result. I've also set an incoming
dial-peer and outgoing
dial-peer on the IPIP-GW and forced a G711u codec.
One bahavior I have observed is that I hear the receiver's audio for a short
period and then
it goes silent. Connections seem normal via show command:
Total call-legs: 2
493893 ANS T9 g711ulaw VOIP P2131234567
202.XXX.XXX.118:18844
493894 ORG T9 g711ulaw VOIP P12134300001
65.XXX.XXX.12:22480
I'm Using IOS c7200-adventerprisek9-mz.124-9.T1.bin
Any ideas anyone?
Thanks!
Ryan
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070730/c4eea397/attachment.html
More information about the cisco-voip
mailing list